Samson UT-5 Bedienungsanleitung PDF herunterladen (Seite 7)

Guided Tour - UR-5/UR-5D

Front Panel

1: Power switch - Use this to turn the main power on and off. When

the receiver is on, the display section (see #5 on the next page) is lit.

2: Antenna A and B mountings - Connect the supplied antennas to

these mountings. Third-party receiver antennas should not be substitut-

ed—use only the antennas provided with your receiver.

3: Group knob - Allows you to select any of ten frequency Groups

(numbered from 0 - 9). When using the Samson UHF Synth System in a

multiuser environment (that is, when there are two or more transmitters

and receivers in use at one location), all receivers

must be set to the

same Group in order to avoid intermodulation distortion. Each individual

performer is then assigned an individual Channel within that Group

(up to eleven channels are available simultaneously*).

4: Channel knob - Allows you to select any of ten frequency Channels

(numbered 0 - 9) within the selected Group.* When a new channel is

selected, it takes approximately five seconds for audio signal to be

passed through to the receiver outputs.

* Only group 9 has more than seven available channels; all other groups

use channels 0 - 6. Refer to the UHF Frequency Chart on page 24 for

more details.

SAMSON

UHF SYNTHESIZED DIVERSITY RECEIVER

ANTENNA - A

UHF

Synth Series

UR-5

GROUP

AF LEVEL

CHANNEL

ANTENNA - B

POWER

AVAILABLE / MUTE

RF LEVEL

AF LEVEL

dbx

NOISE

REDUCTION

RF LEVEL

AF LEVEL

AVAILABLE / MUTE

5d 5e 5c

1 2 3 4 5 6 7 8 9 10 11 12 ... 39 40

Kommentare zu diesen Handbüchern

Keine Kommentare

Samson UT-5 Bedienungsanleitung Seite 7

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Akustik Samson UT-5