Samson SERVO 600 Bedienungsanleitung PDF herunterladen

PRO

PRODUCT SPECIFICATION SHEET

AMPLIFIERS

TYPE:

POWER

AMPLIFIERS

PRODUCT DESCRIPTION

SERVO 600

POWER AMPLIFIER

SERIES

CATEGORY

SERVO 600 AMPLIFIERS

FRONT PANEL

BACK PANEL

GENERAL DESCRIPTION

The Samson Servo 600 stereo power amplifier has

been designed to provide robust, clean output with

low distortion and wide dynamic range, along with

the dependability demanded by the most professional

audio engineers and installers.

The convenient 2 rack-space design is compact,

and yet there’s plenty of power available, with 2 x

225 Watts at 8Ω, 2 x 300 Watts at 4Ω over the full

frequency spectrum, from 10 Hz to 55 kHz.

For mono applications, a Bridge mode links both

channels of the amplifiers, thus providing even more

single channel power, with a power rating of 600 watts

into an 8 Ohm load.

Input connections are available for both unbalanced RCA

connections and balanced 1/4-inch TRS connections.

For the outputs, the Servo 600 amplifier provides

standard 5-way binding posts and 1/4” phone jacks.

Front-panel controls and displays include a power

switch with LED indicator, as well as independent left

and right channel input level controls. To help you set

the correct operating levels, the Servo 600 amplifier

includes front panel Signal, Peak and Protection LED

indicators. There's also a ten-segment VU meter to

help you set a good operating level.

Like all serious power amplifiers, the Servo 600’s internal

electronics are based around a serious power-core,

with an over-sized toroidal transformer and large

extruded heat sink. To keep the Servo 600 amplifier

running cool, the design employs twin internal wind tunnels

with forced-air cooling via two temperature-sensitive, variable

speed fans, which greatly reduce the chance of thermal and

overheating problems. Multi-stage protection for power-

up, over-heating, over-current, short circuit, low output

impedance and DC voltage, assures high reliability under the

most demanding situations.

The Servo 600 amp is road tough with its all steel chassis and

19-inch rack mount design. The Servo 600 amplifier is ready

for a life on the road, or to make its home in a fixed installation.

Optimized for live sound venues, houses of worship, commercial

installations, and for driving small and medium-sized live PA

systems, the Servo Series amplifiers will deliver reliable power

from gig-to-gig, venue-to-venue and day-to-night.

FEATURES

> Power to spare - 2 x 225 Watts at 8Ω, 2 x 300 Watts at 4Ω

> For mono applications, a Bridge mode links both channels

of the amplifiers, thus providing even more power, with a

power rating of 600 watts driving an 8 Ohm load.

> Clean, crisp sound - Impressive audio specifications such

as 0.04% THD, dynamic range of 105 dB, crosstalk of 80

dB, and frequency response of 10 Hz to 55 kHz guarantee

ultra-clean sound quality.

> Independent input level controls for each channel allow

precision adjustments.

continues»

1 2

SERVO 600 1

Inhaltsverzeichnis

Seite 1 - SERVO 600

PROPRODUCT SPECIFICATION SHEETAMPLIFIERSTYPE:POWERAMPLIFIERSPRODUCT DESCRIPTIONSERVO 600 POWER AMPLIFIERSERIES CATEGORYSERVO 600 AMPLIFIERSFRONT PA

Seite 2

SERVO 600PRODUCT SPECIFICATION SHEETSERIES DESCRIPTION CATEGORYSERVO 600 POWER AMPLIFIER AMPLIFIERSARCHITECT’S & ENGINEER’S SPECIFICATIONSThe

Kommentare zu diesen Handbüchern

Keine Kommentare

Samson SERVO 600 Bedienungsanleitung

Stöbern Sie online oder laden Sie Bedienungsanleitung nach Empfänger und Verstärker Samson SERVO 600 herunter. Samson SERVO 600 User Manual Benutzerhandbuch

Inhaltsverzeichnis

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Empfänger und Verstärker Samson SERVO 600