Samson Resolv A5 Bedienungsanleitung PDF herunterladen (Seite 10)

Connecting the Resolv A Series

• Lower your mixer’s master outputs to all the way off.

• Connect the mixer’s Left Control Room output to the left-side Resolv A Series LINE INPUT and the

mixer’s Right Control Room output to the right-side Resolv A Series LINE INPUT.

• Set the Resolv A Series input Volume control to the 2 o’clock position.

•

Run an audio signal (like some music from a CD) through your mixer and raise the Control Room level

to a comfortable listening level.

Resolv A Series Quick Connections

Note: Before plugging in and turning on, remember the “last on, first off” rule of power amplifiers (and pow-

ered monitors). When powering up your system, be sure that all the wires are connected, turn your mixer

and any other outboard gear on, and then last turn your Resolv A Series on. When powering down, turn your

Resolv A Series off first and then your mixer and outboard gear.

The Resolv A Series connections can be made via one of the three rear panel Audio Inputs. You can use RCA

inputs for unbalanced -10dBV level signals, or either the 1/4-inch or XLR inputs for balanced, +4dBu level sig-

nals. Follow the simple steps and diagram below for a quick connection using a standard recording console’s

control room outputs.

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 16

Keine Kommentare

Samson Resolv A5 Bedienungsanleitung Seite 10